logo
Enviar mensaje
Inicio ProductosSistema eléctrico de las telecomunicaciones

S5 Series ATSE 16A-630A for Telecom AC Power System

Certificación
CHINA Tianjin Estel Electronic Science and Technology Co.,Ltd certificaciones
CHINA Tianjin Estel Electronic Science and Technology Co.,Ltd certificaciones
Comentarios de cliente
En los últimos tres años, nuestra cooperación es muy alegre, las gracias por el soporte técnico de su compañía y el servicio paciente, el usuario final muy se satisface con la calidad del gabinete al aire libre de las telecomunicaciones con el enfriamiento. Recuerdos a nuestra cooperación futura.

—— Anthony

Respuesta oportuna, cualificaciones profesionales, actitud rigurosa, entrega rápida, muy nos satisfacen, cooperación somos muy lisos.

—— Manish

A partir 1 muestra a 45 sistemas, 76 sistemas, 200sets, establecimos gradualmente una confianza fuerte. La calidad del gabinete es buena y el diseño es razonable.

—— Parmar

El aire acondicionado ha estado corriendo por uno y medio años. El enfriamiento eficaz es bueno. El buen servicio de la después-venta, y da instrucciones pacientemente para utilizar y para solucionar problemas técnicos. El sistema de vigilancia ambiental también está corriendo bien, y el control remoto el gabinete es muy conveniente.

—— Luis Alberto

Las cajas son grandes nosotros felices con él. Pediremos 30 sistemas cada mes en futuro. Coopere feliz.

—— Andrej Sliachin

Siempre podemos proporcionarnos la buena sugerencia y solución, somos muy agradecidos.

—— Nelson

Estoy en línea para chatear ahora

S5 Series ATSE 16A-630A for Telecom AC Power System

S5 Series ATSE 16A-630A for Telecom AC Power System
S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System

Ampliación de imagen :  S5 Series ATSE 16A-630A for Telecom AC Power System

Datos del producto:
Place of Origin: China
Nombre de la marca: ESTEL
Certificación: CE UL FCC
Model Number: S5 Series ATSE
Pago y Envío Términos:
Cantidad de orden mínima: 1 conjunto
Precio: 715-4286 usd
Detalles de empaquetado: Cuadro de cartón
Tiempo de entrega: 10 días
Condiciones de pago: T/T, Western Union
Capacidad de la fuente: 5000
Descripción detallada del producto
Frecuencia de entrada: 50 a 60 Hz Tamaño externo: L*W*H 130*34*54cm
Voltado de trabajo: Las emisiones de gases de efecto invernadero de los Estados miembros se determinarán en función de l Salida en CC: 122,5 VDC/97-145 VDC
Corriente de trabajo ((3P/4P): 16A a 630A Entrada de corriente continua: El valor de las emisiones de dióxido de carbono se calculará en función de las emisiones de dióxido
Gama del voltaje de MPPT: 120Vdc a 340Vdc, para las máquinas de la categoría M2 Especificación: Es normal
Aplicación: Industrial Potencia de carga (W): 150
Tiempo de trabajo (h): 24 horas, 10h Energía solar (w): 10
Frecuencia de salida: 50/60HZ El color: Camuflaje
Resaltar:

S5 Series ATSE telecom power switch

,

16A-630A telecom power transfer switch

,

AC power system transfer switch

 

S5 Series Automatic Transfer Switch Equipment (ATSE) from 16A to 630A for Telecom AC Power System in L*W*H 130*34*54cm

 

Applications:

The ESTEL S5 Series Automatic Transfer Switch Equipment (ATSE) is suitable for AC power systems with a frequency of 50/60Hz, rated working voltage of AC220/230V (2P), AC380/400V (3P/4P), and a rated working current from 16A to 630A. It automatically switches one or several load circuits from one power source to another to ensure the normal power supply to the load circuits. This ATSE is suitable for important places like industrial, commercial, high-rise buildings, and residential areas.

 

Product Image :

 

     S5 Series ATSE 16A-630A for Telecom AC Power System 0           S5 Series ATSE 16A-630A for Telecom AC Power System 1

 

Operating Environment:

1.1 Surrounding Control Temperature: -5℃ ~ +40℃.

 

 

 

 

 

 

1.2 Atmospheric Conditions: The relative humidity of the air should not exceed 50% at the maximum surrounding temperature of +40°C. At lower temperatures, higher humidity is allowed. At an average lowest temperature of +25°C, the monthly average maximum relative humidity is 90%. Consideration should be given to condensation on surfaces due to temperature changes.

 

 

1.3 Altitude: The installation location should not exceed 2000m in altitude.

1.4 Pollution Level: The environmental pollution level at the installation site is Class 3.

1.5 Mounting Type: Vertical.

1.6 Installation Category: III.

 

 

Terminals and Wiring Instructions:

 

101-102: External indicator light for the status of Power Supply I, no-load signal port.

201-202: External indicator light for the status of Power Supply II, no-load signal port.

301-303: Communication ports for remote control of ATSE actions, reading switch status parameters, and fault codes.

401-402: Programmable, no-load, closed input ports. These can be defined for fire alarm linkage, prohibition of switching, or remote control. Select one of these three options. The default setting is fire alarm linkage.

403-404: Programmable, no-load, closed output ports. These can be defined for fault alarm, grid alarm, load shedding, fire feedback, or output for the two power supplies. Select one of these five options. When the selected function is triggered, the internal contact of the controller closes, outputting a signal. The default setting is fire feedback.

501-502: Default signal output port for generator start/stop. When Power Supply I is abnormal and Power Supply II has no power, internal contacts close, sending a no-load closed signal to start the generator. When the ATSE detects that Power Supply I has returned to normal, the internal contacts open, sending a generator stop signal. If the dual power supply output function is enabled, this terminal is defined as the Power Supply II abnormal output. When Power Supply II is abnormal, internal contacts close, sending an II abnormal signal.

601-602: Auxiliary power input ports. When the product requires delayed generator startup or needs remote monitoring when both power supplies are without power, a DC24V auxiliary power supply must be connected.

 

 

Inspection and Maintenance:

Pre-Power-On Inspection: After installation and wiring, it is recommended to inspect the setup to prevent errors. Check if the installation and wiring are correct, especially the main terminals like the power busbar. Ensure external signal lights are connected properly and check for short circuits. Tighten busbar screws reliably. It is recommended to disconnect the load before the first power-on adjustment. After confirming no issues, proceed with power- on testing.

 

 

 

 

Contacto
Tianjin Estel Electronic Science and Technology Co.,Ltd

Persona de Contacto: Ms. Fiona Liang

Teléfono: +8613752765943 / 86-0755 23592644

Envíe su pregunta directamente a nosotros (0 / 3000)